斯蒂尔女士 361 常见问题和故障排除技巧

斯蒂尔女士 361 是一款深受职业伐木工人欢迎的电锯. 然而, 它有很多问题和故障排除技巧. 使用电锯时要记住这些, 您应该可以毫无问题地使用该工具.

问题和修复

斯蒂尔女士 361: 不开始

当您的斯蒂尔 MS 361 电锯无法启动, there are several things you can check. 第一的, make sure that there is gas in the tank and that the tank is not empty. 下一个, check the oil level in the chainsaw. 如果油位低, add more oil to the chainsaw. 下一个, check the spark plug to make sure it is clean and in good condition.

If the spark plug is dirty or damaged, 换一个新的. 最后, check the air filter to make sure it is clean and in good condition. If the air filter is dirty or damaged, 换一个新的.

斯蒂尔女士 361: 巨响

If you’re experiencing a loud noise from your Stihl MS 361 电锯, there are likely some common problems and troubleshooting tips that can help.

  1. 第一的, make sure the chain is tight and properly lubricated. 随着时间的推移, the chain can become dry and noisy. 此外, keep an eye on the oil level – if it’s getting low, add more oil before using the chainsaw.
  2. 下一个, it might be necessary to clean the carburetor or air filter. These areas can collect debris and gunk over time, which will cause a loud noise and decrease gas flow.
  3. 最后, check to see if there’s anything caught in the chain or gearbox – this could be causing excessive noise or even paralysis of one of the saw’s gears.

斯蒂尔女士 361: 慢轮

Whenyour Stihl MS 361 is having slow wheels, there are a few things you can do to troubleshoot and fix the issue.

第一的, make sure the chainshaft is in good condition; if it is not, it may need to be serviced. 此外, check the air pressure in the carbs and valve stem gaskets; if it is low, the carb may need to be replaced or adjusted. 最后, make sure the battery is charged up and ready to go; if it has not been used in a while, it may need to be checked for deterioration.

斯蒂尔女士 361: 切割时突然死亡

There are a few things that could be causing your Stihl MS 361 to die while cutting. Let’s take a look at a few of the most common causes.

  1. 肮脏的空气过滤器. One of the most common reasons why your Stihl MS 361 might be dying while cutting is because the air filter is dirty. 脏的空气滤清器会限制流向发动机的空气, causing it to overheat and eventually shut down.
  2. Old or damaged spark plug. Another common reason for your chain saw to die while cutting is an old or damaged spark plug. A spark plug that is too old or damaged can lose its ability to create a spark, which is necessary for the engine to run.
  3. Low oil level. If the oil level in your chain saw is low, it can cause the engine to seize up and eventually die. Make sure to check the oil level regularly and top it off if necessary.

斯蒂尔女士 361: 发动机逐渐失去动力

如果你的斯蒂尔 MS 361 engine loses power gradually, it’s likely that something is causing the power to go out. Here are some tips to help troubleshoot this issue and find the fix:

  1. Check the air filter and oil level. If your air filter is low or has not been changed in a while, it may be causing the engine to lose power. The oil level should also be checked, as some engines require more oil than others when starting up.
  2. Check the fuel system. If you’re seeing any issues with your fuel system, it may be causing the engine to lose power gradually. A low fuel level can cause a stumble as you start up the engine, while a dirty fuel line can cause difficulties starting or running on startup.
  3. Look for any possible causes of this issue.

斯蒂尔女士 361: 链条容易松动

If your chainsaw chain tends to be loose, 您可以采取一些措施来解决问题.

第一的, 确保链条得到适当润滑. 下一个, try increasing the tension on the chain by using a tool such as a wrench or plier. 最后, if all of these measures do not help, 您可能需要更换链条.

斯蒂尔女士 361: 电锯上的注油器不工作

For you’re having trouble with your Stihl MS 361 fuel injector on the chainsaw, here are some tips to help you out.

第一的, make sure that the engine is running correctly and that the chain saw is properly configured. If either of those things are not happening, then it’s likely that your fuel injector is not working properly. Try turning the injector key in order to check if it’s still working. 如果不是, then you may need to replace the injector or have it serviced.

斯蒂尔女士 361

常问问题

When did the Stihl MS361 come out?

斯蒂尔女士 361 发布于 2004 and was a very popular model due to its combination of power and features. It quickly became one of the most popular models in the Stihl range.

What CC is a Stihl MS361?

女士 361 是一个 59 cc Stihl chainsaw. 它是一种功能强大的锯,可用于多种任务, 包括砍伐树木, 砍柴, 和清除刷. 女士 361 is a durable saw that is built to last. It features a durable engine, a long-lasting bar and chain, and a host of other features that make it a top choice for those who need a reliable and powerful chainsaw.

What’s the Stihl MS361 specification?

  • 移位: 59 立方厘米
  • 功率输出: 3,4/4,6 千瓦/马力
  • 重量: 5,6 公斤
  • 功率重量比: 1,6 公斤/千瓦
  • 声压级: 101 D b(一个)
  • 声功率级: 114 D b(一个)
  • 振动水平左/右: 2,9/3,6 平方米/平方米
  • 锯链节距: 3/8”

斯蒂尔女士 361

How many horsepower does a Stihl MS361 have?

斯蒂尔女士 361 是一种强大的电锯,能够提供高达 6.3 马力. This chainsaw is designed for heavy-duty use and can handle tough cutting jobs. It is also equipped with a number of features that make it easy to use, including an adjustable oil pump, an automatic chain tensioner, 和符合人体工程学的手柄.

斯蒂尔多少钱一个 361 重量?

女士 361 weighs in at around 11.5 没有酒吧和链条的磅. With the bar and chain, the saw weighs around 13.5 磅. 所以, if you’re looking for a powerful saw that won’t weigh you down, 女士 361 是个不错的选择.

斯蒂尔用什么链条 361 有出厂的?

斯蒂尔女士 361 has a chain from the factory that is part of the same manufacturing process as other Stihl models. This chain is used to tighten the chainsaw chain and makes it easier to operate the saw.

你能把多大的酒吧放在斯蒂尔上 361?

斯蒂尔女士 361 can accommodate bars up to 24 英寸长. This saw is designed for medium to heavy-duty cutting applications, so a longer bar will enable it to handle larger and more challenging projects. If you frequently tackle big jobs, consider investing in a saw with a longer bar to make your work easier.

什么是斯蒂尔 361 最大钢筋长度?

斯蒂尔女士 361 是一种功能强大且用途广泛的锯,可以处理各种任务. It is a popular choice for professionals and serious hobbyists alike. 女士 361 最大钢筋长度为 24 英寸, making it a good choice for larger projects. It is also a very popular saw for felling trees.

一个MS多少钱 361?

女士 361 has a list price of $500, but it can often be found for less than that.

Where to find MS 361 出售?

Your best bet is to check online retailers or auction sites. You may be able to find a good deal on a used model, 但在购买之前确保锯子状况良好很重要. It’s also a good idea to read reviews of the saw before you buy, to get an idea of what other users think of it.

MS吗 361 附带一个案例?

斯蒂尔女士 361 有一个案例. This is a great feature because it means that you can keep your chainsaw protected when you are not using it. The case is also great for storing your chainsaw in when you are not using it.

斯蒂尔女士 361

如何指导

如何重置斯蒂尔 MS 361?

  1. 第一的, you will need to find the spark plug.
  2. 下一个, you will need to remove the spark plug and clean it.
  3. 最后, you will need to replace the spark plug and start the chainsaw.

如何校准斯蒂尔 MS 361?

去做这个, you’ll need to adjust the screws on the carburetor. The carburetor adjustment screws are located on the side of the carburetor. The screw labeled “L” is the low-speed adjustment screw, and the screw labeled “H” is the high-speed adjustment screw.

调整化油器, first start by turning both screws all the way in. 然后, turn the low-speed screw out 1 1/2 turns. 下一个, turn the high-speed screw out 1 1/4 turns. If your chainsaw is still running too lean or too rich, you may need to adjust the screws again. Keep adjusting the screws until the chainsaw is running properly.

如何调整斯蒂尔 MS 上的化油器 361?

Here are some tips on how to do this:

  1. 拆下空气滤清器盖和空气滤清器.
  2. 找到化油器侧面的化油器调节螺钉.
  3. Turn the “L” screw clockwise until it is tight.
  4. Turn the “H” screw counterclockwise until it is tight.
  5. Replace the air filter and the air filter cover.
  6. 启动电锯并让它闲置几分钟.
  7. 如果电锯仍然无法正常运行, repeat steps 3-5.

如何更换 Stihl MS 的杆式油泵 361?

Here are some tips on how to replace a bar oil pump for your Stihl MS 361:

  1. Look for a reputable shop to do the work.
  2. Be sure you have the correct parts in hand before starting work.
  3. Follow the shop’s directions carefully, as they may vary depending on the specific model of Stihl MS 361 you’re working on.

如何调整斯蒂尔 MS 上的链条张紧器 361?

There are a few steps you can take to adjust the tensioner:

  1. Remove the chainsaw’s guide bar and chain.
  2. Locate the tensioner adjustment screw on the side of the chainsaw.
  3. Turn the tensioner adjustment screw clockwise to tighten the tensioner, 或逆时针松开它.
  4. Replace the guide bar and chain, and test the chainsaw to see if the noise has been reduced.

结论

综上所述, if you have any of the common problems with the Stihl MS 361 锯, 最好咨询专业人士. There are some specific tips and troubleshooting tips that can help to solve many of those problems.